radial clearance
英 [ˈreɪdiəl ˈklɪərəns]
美 [ˈreɪdiəl ˈklɪrəns]
网络 径向间隙; 径向游隙
双语例句
- When bearings radial clearance increase with angular contact ball bearings of the feature, may withstand the big axial loads.
当轴承的径向游隙加大时，具有角接触轴承的功能，可承受较大的轴向负荷。 - Rotating impeller week, will go to a certain point of view, the local emergence of Sandy Bay's largest radial clearance or minimum clearance space.
叶轮转动一周，会在转到某一角度时，局部出现口环径向间隙的最大间隙或最小间隙。 - The contacting pressure of the stern bearing is influenced with its elastic modulus, radial clearance and thickness.
艉轴承弹性模量、径向间隙、厚度对接触压力分布有明显的影响。 - Radial clearance control and internal leakage analysis of tri-proportion controller
三组元比例控制器的端面间隙控制及内泄漏分析 - The thickest measuring plate that can just be pulled through indicates the radial clearance value.
能刚好卡在中间的最厚测量板的厚度即是径向间隙值。 - Influence of inner ring double raceways centre distance of self-aligning roller bearing on radial clearance
调心滚子轴承内圈两滚道中心距对径向游隙的影响自动调心球面滚子轴承 - Pressure Calculation of Powder Gas in Bush Radial Clearance
衬套径向间隙部位火药气体压力计算 - The Effects of Radial Clearance Between Piston and Cylinder Bore on Piston Lubrication
内燃机活塞裙部配缸间隙对裙部润滑影响的研究 - Investigation of the Radial Clearance Leakage in Rolling Piston Compressor
滚动转子式压缩机内转子径向间隙泄漏的研究 - To determine the theoretical value and practical value of radial clearance of sliding bearing was introduced with practical example.
通过实例介绍了滑动轴承径向间隙理论值和实际值的确定。 - Analysis of Fit between Cylindrical Roller Bearings and the Original Radial Clearance on High Speed Trains
高速列车圆柱滚动轴承的配合和原始径向游隙分析 - Effects of Radial Clearance on Performance of Inverter-driven Rolling Piston Rotary Compressor
转子径向间隙对滚动转子式变频压缩机性能的影响 - The calculation method for radial clearance of turbine blade tip considering the effect of temperature and rotational speed is developed in this paper.
给出了考虑温度和转速影响的涡轮叶尖径向间隙的分析计算方法。 - The important factors influencing the radial clearance of anti friction bearings are analysed theoretically.
从理论上分析了滚动轴承径向游隙的重要影响因素。 - The equivalent radial clearance of flow resistance is an important parameter for hydrostatic bearings in theory and calculation.
等效间隙是静压支承理论分析和计算中的一个重要参数。 - CFD Research on temperature field in radial clearance of hydraulic spool valve
液压滑阀径向间隙温度场的CFD研究 - Research and modeling of the Leakage through the Radial clearance of the Roots Vacuum Pump
罗茨泵径向间隙泄漏量的研究与建模 - The rotor lobed, radial clearance calculation, end play orientation and adjustment, the determination of the meshing clearance between two rotors pressure angle of the Root's blower used for PTA conveying was discussed.
对PTA输送用罗茨鼓风机的转子叶型，径向间隙的计算，轴向间隙的定位，调整和两转子压力角位的啮合间隙的确定进行了讨论。 - A Design Method for Turbine Rotor Radial Clearance of an Aeroengine
航空发动机涡轮径向间隙设计方法研究 - The factor affecting bearing internal radial clearance, the relationship between clearance and operating life time and fan failure process were discussed.
讨论了影响轴承游隙的因素和轴承游隙与轴承寿命的关系，并对轴承游隙过小而导致整个风机损坏的逻辑过程进行了推理。 - In this paper a refrigerant leakage model through radial clearance in scroll compressor is set up.
本文建立了涡旋式压缩机气体通过径向间隙的泄漏模型。 - Discussion on affecting factor of rolling bearing radial clearance
影响滚动轴承径向游隙因素的探讨 - The results show that the system stability is directly influenced by the radial clearance of cylindrical roller bearing.
结果表明：圆柱滚子轴承的径向游隙直接影响着滚动轴承-双转子系统的稳定性。 - The influence of radial clearance of sliding bearing on the superheat failure of bearing was expounded.
阐述了滑动轴承径向间隙对其本身过热故障的影响； - Effect of temperature and rotational speed on radial clearance of turbine blade tip
温度与转速对涡轮叶尖径向间隙的影响 - The use of higher viscosity lubricants and allows both sides of the radial clearance and surface space skateboards smaller size also allows further leakage and then become smaller.
使用更高粘度的润滑油和使得径向间隙和滑板两侧面间隙尺寸进一步变小还可使得泄漏量再变小。 - At the same time by changing the CAD model of radial clearance, the different radial clearances of the axial flow fan are compared for the Fan performance optimization.
同时通过改变CAD模型中的径向间隙，对不同径向间隙的轴流通风机流场进行对比，得到了优化的风机设计。 - The performance influence of sinking degree and radial clearance change of the cooling fan and the auxiliary member and the commonly used top ring structure in the arc bending plate fan are analyzed.
在风扇风室模型内对冷却风扇与辅助部件的沉入量和径向间隙变化对性能影响进行了分析，并将圆弧弯板风扇常用的顶环结构对风扇性能影响进行了仿真分析。 - Focusing on the research of some important design parameters impacting the carrying capacity of the bearing, including radial clearance, contact angle and groove radius of curvature coefficient, a detailed analysis was given, and the corresponding bearing design recommendations were presented.
着重对影响轴承承载能力的重要设计参数径向游隙、接触角、沟曲率半径系数等进行了仿真，并给予了详细的分析，提出了对应的轴承设计建议。 - Meanwhile, dynamic process of radial expansion is studied; dynamic balance equation of clearance self-compensation in flexible and elastic wall is established, and clearance self-compensation and swimming characteristics are studied theoretically and experimentally based on characteristics of radial clearance, and start-up rotating speed is proposed.
同时对微机器人在柔弹性壁内的径向膨胀的动态过程进行了分析，建立了间隙自补偿动态平衡方程，依据径向间隙的特性，提出了启动转速的概念。